I used One-Shot. I'm new at this and need to learn how to process the images.
Tom
Thanks. There is a huge and important lesson here that most folks overlook. When you are attempting to make a sharply focused image when hand-holding it is imperative to use AI Servo AF with Canon or C with Nikon. Though you think you are standing still, your body is actually swaying all the time. So from the time that you focused (probably and correctly on the bird's eye), you moved a bit changing the distance between the imaging sensor and the subject's eye. This the tail is sharp and the eye is un-focused.
Even better would be to use a tripod especially at such a slow shutter speed. Then you can confidently use One-Shot AF (or S for Nikon), recompose, and create a sharply focused image. The problem with using AI Servo or C in situations like this is that the AF systems have a big problem focusing accurately in low-light/low contrast...
Best to use a tripod and One-Shot (or C) in low light. I will be copying this thread to the Educational Resources Forum so that all can learn from it.
I first realized the problem on my Wild Britain cruise this past June when I was handholding the 400 DO with the 40D and using One-Shot AF. I was mystified as to why I had so many poorly focused images... Another important lesson the I learned in the aftermath is that if you need to use One-Shot (or C) that it is imperative to brace your elbow on your knee or something else like a railing if possible, but even then, there is usually enough movement to throw off he focus... And the lonver the effective focal length, the greater the problem.
I will add an image or two with additional comments to the copied thread.
As for learning to optimize your images, I wrote the Digital Basics File for folks like you. You are advised to check it out on the home page.